GLK3-400 3 in 1 Unit Feeder for Metal Coil Pressing In Automation Feeding System

Categories	GLK3 3 in 1 Coil Feeder for Press
Brand	HongEr
Model	GLK3-400
Function	automation feeding
Feature	Servo Straightener Feeders
Name	3 In 1 straightener Feeder
Compact	Coil Handling Equipment
Usage	for auto parts stamping
attribute	Sheet Metal Feeding Equipment
Update Time	Apr 26,2024

Contact Now

Favorites

Detail Information

GLK3-400 3 in 1 Unit Feeder for Metal Coil Pressing In Automation Feeding System

Description

Decoiler Section

1, Pressing arm with pneumatic to press coil;

2, PU wheel on the pressing arm, so as to protect the surface of coil;

3, Supporting arm with pneumatic to lift coil;

4, Decoiler mandrel with hydraulic expansion and delta inverter;

5, Coil keeper with pneumatic to locate coil;

6, Hand wheel for centring adjustment.

Straightener & Feeder Section

1, Feeder inlet;

2, Coil inlet arm for coil feeding assistant;

3, Hand wheel to control the stop rollers which can allocate the strip;

4, Display screen is from Weinview Taiwan;

5, Worm & gear adjustment to adjust the gap between straightener rollers;

6, Outlet support bracket can be customized with the length;

Specification

Model	GLK3-400	GLK3-600	GLK3-800	GLK3-1000
Coil width(mm)	50-400	50-600	50-800	50-1000
Coil thickness(mm)	0.3-4.5	0.3-4.5	0.3-4.5	0.3-4.5
Coil weight(kg)	3000	5000	7000	7000
Coil I.D.(mm)	480-520
Coil O.D.(mm)	1200
Feeding pitch(mm)	0-500
Speed(m/min)	16-24
Straightener roller(pc)	4 on top / 3 on botton
Feeding roller(set)	1
Servo motor(KW)	AC4.4	AC4.4	AC5.5	AC5.5
Uncoiler motor	AC2.2	AC2.2	AC3.7	AC3.7
Expansion	Hydraulic
Power(V)	220/380
Operating Air(Mpa)	0.49

Features

GLK3 series of unit coil feeder machine: 1, combined decoiler, straightener and feeder to save work space and make the whole line speed synchronous with press machine 2, with full automation function of uncoiling, straightening, feeding 3, handling the metal coil sheet with 0.5-4.5mm thickness 4, large capacity of decoiler mandrel could carry up to 10 tons weight of metal coil 5, coil car to help metal coil upload and save time for material changing. Meanwhile, make the job more safety and easy opreation 6, safety guard could be customized if needed 7, ground pit may needed if the metal coil OD is as large as 1800mm or the feeding pitch is over 500mm. Ground pit will help to make longer metal coil sheet so as to keep the speed of punching 8, coil keeper adjusted by hand wheels, but electrical adjustment is optional 9, straightener roller adjusted by worm and gear. electrical adjustment could be customized 10, feeding height can be adjusted in range +/-100mm to make equal to the lower die height of press machine 11, hydraulic shearing is optional for metal coil head cutting 12, lubrication device is optional if needed to protect press tooling

Application

GLK3-400 is uncoiling straightening and feeding metal coils with 400mm width in press room. It realizes automation feeding when equipped with press machine. It is compacted with mechanical / hydraulic press machine and used in construction metal parts line, automobile stamping line, furniture stamping line.